Beschrijving
Euro-Mill Maximart 2VA/2VS/2Vi
Klik op de foto van de machine voor meer informatie.
|
ITEM/MODEL |
2VA/2VS/2Vi |
|
|
Table |
||
|
Table size |
230 × 1245 (9”× 49”) |
|
|
No. of T-slots |
NO. 3 |
|
|
T-slots width |
28 (1.1”) |
|
|
Slideway hardened & surface ground |
YES |
|
|
Table surface hardened & Ground |
YES |
|
|
Slideway dovetail “V” or square “SQ” |
XYZ = V |
|
|
Manual Travels |
||
|
X axis |
Manual |
970 (38.2”) |
|
Auto(Opt.) |
890 (35.0”) |
|
|
Y axis |
360 (14.2”) |
|
|
Z axis |
355 (14.0”) |
|
|
Ram |
470 (18.5”) |
|
|
Milling Head |
||
|
Motor |
3HP |
|
|
Spindle speed r.p.m. (Step Pulley) |
50HZ / 75-3800 16-Step 60HZ / 60-4300 16-Step |
|
|
Spindle speed r.p.m. (Mechanical Variable) |
50HZ/ Low range 75-450 High range 680-3800-VARIABLE 60HZ/ Low range 60-500 High range 550-4300-VARIABLE |
|
|
Spindle speed r.p.m. (InVerter Variable) |
70-4200-INVERTER |
|
|
Spindle taper |
R8/NT30 |
|
|
Quill travel |
127(5”) |
|
|
Quill feed/spindle rev. |
0.04, 0.08, 0.015 rev. (0.0015”, 0.0031”, 0.006”) |
|
|
Quill diameter |
86(3.38”) |
|
|
Head tilt (front or back) |
45° |
|
|
Head swivel (left or right) |
90° |
|
|
Construction |
||
|
Column turret diameter |
Ø380(Ø14.96”) |
|
|
Knee width |
290(11.42”) |
|
|
Column bearing length |
420(16.54”) |
|
|
Saddle/table bearing length |
505(19.89”) |
|
|
Ram/turret bearing length |
410(16.14”) |
|
|
Ram length |
735(28.94”) |
|
|
Machine net weight |
950kgs(2100 lbs) |
|
|
● Above specifications are subject to change without prior notice. |
||
